Code 12 (WC-2)

Some domestic water-based stains may be cleaned carefully from the front face of this wallcovering. Oils, fats and solvent-based stains are not expected to be removable.
Remove stains immediately to eliminate any possible reaction between the staining agent and wallcovering. If soil remains on the wallcovering, permanent discoloration may develop. Use a soft damp cloth, mild soap and warm water to remove a ‘fresh’ stain by gently dabbing the contaminated area. Rinse thoroughly with a clean damp cloth. Blot wallcovering dry with a soft, lint-free cloth. Adhesive may be wiped off the face of the wallcovering with a damp soft cloth or sponge at the time of hanging without causing visible damage, providing it is done whilst the adhesive is still damp.
Do not use solvent type cleaning preparations. Do not use steel wool, powdered abrasives or abrasive sponges. Do not use a dry cloth/sponge on the dry wallcovering surface. These methods will damage the surface of the wallcovering.

Storage and Handling:

Deliver wallcovering and adhesive to the job site in unbroken or undamaged containers and clearly marked with the supplier's identification label. Store wallcoverings in a flat position to avoid damage to roll ends. Store materials in a clean, dry storage area with temperature maintained above 13C with normal humidity. DO NOT CROSS STACK THIS PRODUCT.

Email Print